Universal isolating converter for Wheastone bridge load cells and sensors.
It supplies an RS485 MODBUS RTU output signal. You can enter from 1 to 4 load cells with excitation protected against short circuits permanently.
It has an isolated 24VDC (20.. 30V) power supply with a wide margin.
The power supply to the module as well as the excitation to the cell is supervised by signaling the front LED OK.
Automatically admits tension/compression cells (output 12±8mA, 0/±10V).
It allows absorbing (subtracting) or adding a wide tare range with great precision and stability.
It has a selectable filter in 4 levels to stabilize the output signal depending on each application.
All these parameters are easily configured on the front, being protected by a hinged cover.
It is protected by complying with EMC standards for industrial applications.
The connection is made by pluggable terminals, they facilitate the rapid exchange of modules without the need for rewiring.
- CONFIGURABLE GAIN AND TARE RANGES
- MULTI-SCALE WITH HIGH PRECISION STEPS
- CONFIGURABLE TARE (ADD / SUBTRACT)
- RS485 MODBUS RTU OUTPUT
- ISOLATED POWER SUPPLY 24 VDC
- CELLS EXCITATION 10/5V @ 120mA